The area that you want painted could be made of any number of materials. A professional painter will know what method of surface prep will achieve the best result and ensure the lifespan of the paint. For instance, there are a variety of solvent cleaners that pros use for things like aluminum, copper, Hardie board, or steel. If you are painting stucco 6, especially if it is exterior, it will require 10 to 30 days after cleaning to thoroughly dry before applying paint. Depending on the level of build-up, bricks, mortar 7, and concrete may require power washing to get them clean enough for paint to adhere and stay put. The material, age, and condition of the surfaces to be painted will also dictate the amount of time and work that are required for proper preparation. An experienced professional is the best person to ascertain what prep will give you the best end result.
Stripping – $54–$151/100 sq. ft.. “The principle of paint strippers is penetration of the paint film by the molecules of the active ingredient, causing its swelling; this volume increase causes internal strains, which, together with the weakening of the layer's adhesion to the underlying surface, leads to separation of the layer of the paint from the substrate.”— Wikipedia. All the stripper will do is soften the paint. You’ll still have to scrub or scrape it off. Louisville Home Painting
Some service pros are employees, franchisees, dealers or independent contractors ("Corporate SP's") of larger national or "Corporate Accounts". When this is the case, you may be matched with the Corporate Account or with one of their Corporate service professionals. The above screening process is not applicable to Corporate Accounts, as HomeAdvisor does not screen Corporate Accounts or Corporate service professionals. Louisville House Painting
While vinyl siding salespeople claim it never needs to be painted, it does lose its color strength over time, and the degree of fading can vary depending on which sides get the most exposure to sunlight. Perhaps it still hasn’t faded, but you don’t like the color much. You can’t go any darker than its current color, though, because the siding is designed to absorb only so much heat, and a darker color could cause it to buckle. Vinyl paint is available in many colors. Brush painting and roll painting vinyl siding costs $43 per 100 sq. ft., and spray painting costs $34 per 100 sq. ft. House Painters Louisville
Priming - $30–$40/hour for labor. Many of the materials above need to be primed, but not all do. If you’re changing paint colors from dark to light or light to dark, use a color similar to the top coat. That way you’re less likely to need extra coats over the standard two. Prime with a flat or eggshell paint. You can ask your paint store to add tint to the primer to match it with the top coat color. Hammer in exposed nails and spray them with a metal primer to prevent rust. House Painters Louisville