Prime. Dark colors, stains (once sealed), and previously unpainted surfaces (drywall, spackle, etc.) will need a primer coat, usually white. NOTE: most paint stores & home improvement centers will now tint primer (at no charge) to match fairly close to the color of the finished coat, that way two coats of primer need not be applied. Although not all surfaces need a prime coat, skip this step at your peril! Dark colors will likely show through the first -- or even the first couple-- topcoats of paint. Sealants and unpainted surfaces like spackle patches will absorb or repel moisture in a topcoat at a different level than the areas surrounding them. Applying a good primer coat will help even out these differences. Primer equalizes a wall to a uniform surface. It's like erasing a canvas before drawing a new picture. Although some will argue the point, you generally don't need to spend a great deal on primer or buy special primer. A cheap, 5 gallon (18.9 L) bucket of plain, flat white paint will usually do the trick and cover a large area. Give your primer at least 24 hours to dry (follow its instructions) before applying a topcoat.
Look for a licensed painter who has worked on similar projects before and can give you a written estimate. The estimate should ideally include cost of labor, cost of materials and supplies, cost of prep work with details, brand of paints and primers 3 (if the painter is responsible for the supplies), payment schedule, final inspection, and cost of cleanup and debris removal after project completion.
Your contractor will sweep or scrub the concrete first with a dry brush, and then clean it thoroughly with trisodium phosphate (TSP) and warm water, then let it dry. TSP is a mostly alkaline solution that does a great job cleaning grease and oil off concrete surfaces. Brush painting concrete siding costs $138 per 100 sq. ft., roll painting costs $50 per 100 sq. ft., and spray painting $32 per 100 sq. ft.
Typically, your painter will charge you an additional $300 per room for preparations tasks such as wallpaper removal. Pressure washing the exterior of a standard single-story home will cost you around $275. Cleaning a smoke-stained ceiling can cost you another $100. You may be able to save some money if you do some preparation tasks yourself, such as moving furniture away from the wall, removing pictures etc. Professional painters usually charge around $100 per room if there is a lot of furniture to be removed. House Painters Louisville
The Coordinator. This person will care for the needs of the rest of the workforce, fetch drinks, make sandwiches, make runs to the store for last-minute needs, cook (or arrange) lunch and dinner, make phone calls, get directions, wash brushes, etc. Don't underestimate the need for this key person! When not gainfully employed, he or she can do some rolling. Louisville House Painting
It's up to you. Outside is much harder because it requires more prep, patience, time, help, money and of course, effort. I have been painting my own houses and rental properties interiors for 20 years, and I painted the exterior of one, once. I then had it promptly done again by professionals who said it would have been cheaper if they didn't have to undo my work first. My advice is to get pros for the outside because everyone will see it. Louisville Home Painting